VT/VTS  Series Articulated Pneumatic
Tapping System by Volumec

The VT/VTS Articulated Tapping System features a two speed high torque pneumatic spindle mounted on a balanced, articulated arm with a reach of nearly 75 inches and a multi-directional magnetic positioning head.  The VT/VTS system is capable of tapping fine holes from #0 – 1” (M3 - M26) in steel.  It was designed to run off standard shop air, portable compressor, or even an air cylinder (limited run-time).

 

Constructed of aviation grade tubular aluminum, the strong yet light weight arm allows for extreme portability with ease of positioning and accuracy through the use of adjustable gas spring mounted on a ball bearing joint..  It is ideal for bench mounted workstations, yet portable enough for shop cart mounting, and excels at truck-mounted in-field applications.

 

ET Series Articulated Pneumatic Tapping System by Volumec

A smaller version of the VT/VTS Series with single speed high torque pneumatic spindle mounted on a balanced, articulated arm with a reach of 50” and a multi-directional magnetic positioning head. The ET system is capable of tapping fine holes from #0 – ½” (M3 - M12) in steel.  It was designed to run off standard shop air, portable compressor, or even an air cylinder (limited run-time).

 

Constructed of aviation grade tubular aluminum, the strong yet light weight arm allows for extreme portability with ease of positioning and accuracy through the use of adjustable gas spring mounted on a ball bearing joint..  It is ideal for bench mounted workstations, yet portable enough for shop cart mounting, and excels at truck-mounted in-field applications. 

 

JT Series Articulated Electric Tapping System by Volumec

The JT Articulated Tapping System features a multi-speed, adjustable high torque electric motor mounted on a balanced, articulated arm  and a multi-directional magnetic positioning head.  The JT system is capable of tapping fine holes in M3 - M26 steel.  The JT2 series has a reach of 51” while the JT3 series has a reach of nearly 75”.

 

Constructed of aviation grade tubular aluminum, the strong yet light weight arm allows for extreme portability with ease of positioning and accuracy through the use of adjustable gas spring mounted on a ball bearing joint..  It is ideal for bench mounted workstations, yet portable enough for shop cart mounting, and excels at truck-mounted in-field applications.

 

Screwdrivers with torque control clutch

Pneumatic screw driving system designed and constructed to deliver high performance with precision, low noise, long-term reliability and thoughtful ergonomic design.  Incorporation of the articulated arm alleviates worker fatigue while improving product quality and productivity. The Av series of screw drivers are capable of driving screws from 1/8 – 3/8” (M3 - M10) with torque levels up to 35Nm.

Tightening System

AUTOVIT screwdrivers with automated screw feeding greatly increase productivity with improved product quality.  The articulated arm allows the worker to maintain perfect alignment with the workpiece while eliminating the weight of the tool from their hands.

 

The continuous supply of screws is delivered to the driver through the aligning vibration system.  Sensors on the guides automatically stop the vibrator when they are full to prevent jamming and reduce energy consumption, and restart it once an absence of screws is detected.

 

 

 

 

 

 

Volumec

VT/VTS articulated Tapping System
(shown with optional shop cart)

Volumec

Articulated arm has 75” of reach

Volumec

Multi-directional magnetic positioning head

Click here to view the
Volumec Catalog

 

Click here to view the
Joytap Catalog